STIHL MS 211

Engine
Displacement	2.15 cu. in. (35.2 cc)
Horse Power	2.3 bhp (1.7 kW)
General
Weight	9.5 lb. (4.3 kg)
Cutting Length	12 in. to 18 in. (30 to 45 cm)

Model Features

Built in the USA: Indicates products that are built in the United States from domestic and foreign parts and components.
Anti-Vibration System: STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
STIHL ElastoStart™: The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
IntelliCarb™ Compensating Carburetor: The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
STIHL Quickstop®: STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
Ematic™ Lubrication System: The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
Master Control Lever™: The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.

Specifications

Displacement: 35.2 cc (2.15 cu. in.)
Engine Power: 1.7 kW (2.3 bhp)
Powerhead Weight: 4.3 kg (9.5 lb.)
Fuel Capacity: 280 cc (9.5 oz.)
Chain Oil Capacity: 180 cc (6.1 oz.)
Oilomatic® Chain: 3/8″ PM3
Guide Bar Lengths (Recommended Ranges): 30 to 45 cm (12″ to 18″)STIHL ROLLOMATIC®
Power Source: Gas

Notes

STIHL recommends #3636 (63 PM3 61) OILOMATIC® saw chain and 18″ 3005 000 4817 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.