Honda Power Equipment HHT35SLTA

• The ultimate hand-held solution for heavy-duty trimming and brush removal: The HHT35SLTA takes all the features of the HHT25 and bumps up the power. Perfect for taking on the challenging jobs.
• Easy starting, 4-stroke Honda engine: The Honda Quick Start system offers a quick, easy start. No hassle. No fuss. Every time.
• Runs on regular gas – no mixing!: Honda’s GX35 mini 4-stroke engine runs on straight, unleaded gas. No need to mix gas and oil!
• Fuel efficient design: Highly fuel efficient design costs less to operate – up to 50% less than a two-stroke trimmer!
• Quick acceleration and excellent torque for demanding jobs: Designed to take on thick grass and heavy brush without bogging down. Strong low-end torque characteristics allow many jobs to be performed at partial throttle, increasing fuel efficiency.
• Comfortable loop handle design: Vibration dampening design makes the HHT35SLTA more comfortable to operate.
• Durable flex shaft with limited lifetime warranty: Flex shaft with limited lifetime warranty for increased durability and superior shock absorption
• Deflector designed to provide increased operator visibility: Equipped with an automatic line cutter.
• Solid trigger design for increased durability
• 17″ Semi-matic bump feed head, with Ultra Quiet® line: Ultra Quiet® line significantly reduces the trimmer’s noise level.
• Less smoke and odor: 4-strokes don’t burn oil like a two-stroke engine. Which means there’s less smell and no smoke – and less headache for you.
• Lower vibration for more comfortable operation: The GX35 creates less vibration than comparable engines. An advanced anti-vibration system is designed into the engine clutch housing to further minimize operator fatigue.
• Ergonomically designed and positioned controls: Balance and maneuverability are superb due to the optimization of the engine’s center of gravity, as well as the location of the throttle assembly and loop handle.
• Use and store in any position: Unique 360 degree inclinable engine can be used and stored in any position.
• Safety glasses and harness included
• Can accommodate a variety of 9″ and 10″ cutting blades with optional barrier kit

• Engine: GX35
• Displacement: 2.18 cu. in. (35.8cc)
• Fuel: Unleaded Gasoline (86 Octane or higher)
• Fuel Tank Capacity: 22.0 fl oz.
• Carburetor: Diaphragm Type w/Fuel Pump
• Idle Speed: 3,100 +/- 200 rpm
• Max.(no load) RPM: 10,000 rpm (without cutting head)
• Dimensions (LxWxH): 73.8 in. x 12.8 in. x 10.2 in.
• Dry Weight: 14.8 lb. (w/o head) 15.5 lb. (with head)
• Engine Stop Switch: Slide Type Switch
• Throttle control: Two Motion Trigger
• Main Pipe Diameter: 1.0 in. (25.4mm)
• Main Pipe Thickness: .06 in. (Aluminum)
• Drive Shaft: Flexible Steel Cable
• Shaft Support: Nylon Support Sleeve
• Gear Ratio: 1.235
• Handle: Loop Type
• Cutting Head: Semi-matic Feed-Nylon
• Line Type: Ultra Quiet
• Cutting Width: 17 in.
• Single Harness: Standard
• Double Harness: Optional (must be used with all blade applications)
• Safety Goggles: Standard
• Steel Blade: 9 in. or 10 in. Blades Optional (requires barrier kit)
• Blade Barrier Kit: Optional (must be used with all blade applications)
• Residential Warranty: 2 years
• Commercial Warranty: 1 year

• Double Harness
• Blade Barrier (must be used with all blade applications)
• 9″ Cutting Blades
• 10″ Cutting Blades

WARNING: This product can expose you to chemicals including soots, tars, and mineral oils, which are known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.