eXmark TTS481GKA48300

• Steering Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
• Casters: .38″ thick caster yoke arms
• Front Caster Tires: 9 x 3.5-4, smooth-tread, semi-pneumatic.
• Drive Tires: 16 x 7.5-8, 4-ply Turf Master®
• Safety Package: Operator Presence Controls (OPC) Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
• Parking Brake: Lever-actuated mechanical compression.
• Electrical: No battery, recoil start w/ 5 amp clutch coil
• Standard Features: Engine hour meter

• Engine Model: FS481V
• Engine Brand: Kawasaki®
• Engine Series: V-Twin
• Engine Speed: 3,600 rpm
• Air Filter: Standard Engine Manufacturer’s air filter
• Drive Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1″ (2.54 cm) tapered shafts.
• Speed: Infinitely variable speed selection from 0- 6.2 mph (10 kmph) forward, 0-2.2 mph (3.5 kmph) reverse.
• PTO Engagement: Electromagnetic 105 ft-lbs clutch.
• Fuel Capacity: 5-gallon (18.9-L) fuel tank.
• Drive Wheel Release: Allows unit movement without engine running.
• Deck Lift: Manual lift with hairpin from hole to hole for position adjustment.
• Fuel System: Carbureted
• Engine Displacement: 603
• Drive: Hydro-Drive
• Fuel Indicator: None
• Carb Compliant: No
• Fuel Type: Gas Carbureted
• Model Description: Turf Tracer S-Series 14.5 HP* Kaw FS481V w/48″ UltraCut Series 3 Deck

• Deck Style: Floating Deck
• Deck Style Description: Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
• Width / Cutting Deck: 48″
• Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
• Cutting Heights: 1.5″ (3.8 cm) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments.
• Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
• Blade Tip Speed: Approximately 18,500 fpm.
• Blades: 3 Blades at 16.25″ Length

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower. **The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.